2021 Hog Slat/Georgia Poultry Retail Product Catalog

67 SLAT SYSTEMS • 50% open area permits excellent manure filtration with minimum build-up for a clean, sanitary environment. • Strong, stable walking surface with minimal sag. • Easily installed on 2” x 4” or 2” x 6” wooden supports - flooring can be cut to specific sizes. • Smooth, non-porous surface is easy to clean and disinfect by carrying 4’ sections out of house for easy cleaning with pressure washer without having to disassemble flooring. • Reinforced pre-molded screw holes allow for fast assembly of slats to frame. • Does not deteriorate or need to be replaced after every flock of birds like wooden slats. Flooring #DL13504 .................. Slat Red Rooster Non-Overlapping 24.44” x 48” WHITE #DL13507 ...................Slat Red Rooster Non-Overlapping 24.44” x 48” BLACK #DL13502 ........................... Slat Red Rooster Overlapping 24.44” x 48” WHITE #DL13501 ........................... Slat Red Rooster Overlapping 24.44” x 48” BLACK • Can withstand extremely hot and cold temperatures. • Neutral no-break polypropylene does not absorb body heat from birds and improves production rates, black no-break polypropylene slat floor is UV protected. • Non-corrosive, will not harbor bacteria, rot, rust, or absorb water like wooden slats. • Used with success under birds of all sizes - from little chick to large chicken. • Made in the USA with a 2-Year Warranty Red Rooster Poultry Slat Floor is a very durable, cost-effective, bacteria resistant, long-lasting flooring designed to replace wood and wire slats in poultry houses. Overlapping and Non-Overlapping slats available Overlapping Non-Overlapping Dyer Slat • 15 years of proven performance. • Heaviest slat in the industry • Slats are made of polypropylene providing non-porous surface. • Unique triangle support shape adds strength needing only three 2 x 6 runners per section. • Two inch overhang of support runners allows litter to fall through Specifications: • 1-1/4” high • 24” x 48” Overall • 1-3/4” x 7/8” Obround Holes • 8.42- lbs per slat • We recommend using Three 2” x 6” wooden supports and a #10 2-1/2” Flat Head Phillips Zinc Coated Screw #IS524002-0 ....................................Slat Plastic Dyer 2’ x 4’ Smooth Top Black • UV Protected. • Interlock system insures a strong, uniform surface. • Made of tough polypropylene, slats provide a stable walking surface. • Installs on any type of frame. • Easy to clean and disinfect. • Reinforced pre-molded screw holes for fast assembly of slats to frame. • Can withstand extremely cold and hot temperatures. • Fiberglass frames available. • Recommended installation is Four 2” x 6” Runners per 4’ wide section. A-V’s unique “Interlock” system (cross-section) Size..............................................................................................24” x 48” x 13/16” Opening size................................................................................... 1-1/8” x 1-1/8” Weight............................................................................................................ 5.1 lbs. Supports..............................................................................24” on center one way Plastic Slats #AVPA02448 ................................................................................ 24” x 48” Black #AVPA02448W ............................................................................ 24” x 48” White #SLAT4X2-R ..................................Slat Black 4’ x 2’ Recycled Plastic Sturdislat #SLAT4X2-V ......................................Slat White 4’ x 2’ Virgin Plastic Sturdislat #SLAT5X2-R ..................................Slat Black 5’ x 2’ Recycled Plastic Sturdislat • High Density Polyethylene is stronger and more durable • White or Black • Progressive truss support engineered not to sag • 1.04in/26.5mm square openings for easier cleaning and better paw quality • UV inhibitors extend life • Made in the USA sturdiSLAT™ NEW!