199 INLETS • 1” polystyrene with fiberglass coating • Flexible PVC hinge • Available in 8”, 12”, 16”, 18”, 20” and 24” widths • 8’ sections Adjust-A-Baffle 1. Order Baffle and Hinge separately (must order in 65’ lengths): #GAP-1896........................................................................................................................................ 1” x 8” x 96” #GAP-11296.................................................................................................................................... 1” x 12” x 96” #GAP-11696.................................................................................................................................... 1” x 16” x 96” 2. Order Baffle and Hinge separately (must order in 65’ lengths) #GAP-WS65................................................................................................................Baffle weather-strip - 65’ #GAP-HS65........................................................................................................... Hinge for baffle system - 65’ 3. Order S.S. Rod & Clamp package (must order in 100’ lengths) #GRCP-SW-B.............................................................................................................100’ rod & clamp package (INCLUDES: 105’-1/8” SS rod; 33-Azium Nuts; 60-3/16” x 1” lag eyebolts; 33-30” polyester lift cords; 33-Nylon fender washers; 40-1/8” Cable Clamps) 4. Order S.S. Cable to connect rod to winch & closure spring #61739.......................................................................................................................... 1/8” stainless steel cable #617321............................................................................................................ 1/8” stainless steel cable clamp 5. Order Winch & Hardware #DL61737.......................................................................................................... 1400 lb. winch w/cable keeper #61740...................................................................................................................................L-bracket for winch #60516.................................................................................................................3/8” x 1-1/4” bolt (2 required) #60682........................................................................................................................3/8” lock nut (2 required) #60670...................................................................................... 3/8” x 1-1/2” flat fender washer (2 required) 6. Order Corner Pulleys (one for Winch, one for Spring Return End) #HSH001...............................................................................................................3-1/2” needle bearing pulley #61744.............................................................................................................................................Pulley bracket #60649....................................................................................................................... 1” x 2-1/2” x 5/16” U-bolt #60681............................................................................................................................................ 5/16” lock nut 7. Order Baffle Return Spring (takes place of counter weight) #HS17110................................................................................................................................Baffle return spring How to order your Adjust-A-Baffle: 360° Airflow Attic Inlets direct tempered air evenly along the ceiling in all directions, resulting in uniform temperatures throughout room. Removable bottom lid for easy cleaning and installation. Double L 360o Insulated Attic Inlets #GC1140. ..Gravity Flow 4 Way Insulated Attic Inlet #AC3010..........Actuated 4 Way Insulated Attic Inlet Ceiling Air Inlet #GCAI-1000CW.............1125 CFM w/ 17” x 17” R.O. #GCAI-2700CW............3128 CFM w/ 25” x 25” R.O. • Laminated baffle to prevent damage during cleaning • Plastic housing with stainless steel insert • Adjustable locking lever allows the unit to be shut off or restricted Munters Attic Inlet #ABI28SP-01......................Static pressure activated #ABI28SPM-01...................... Mechanically actuated • Aerodynamic frame and door design for precise control • Unique constant force springs provide easy adjustment of static pressure • Doors close tightly to prevent attic condensation • Stainless steel door hinges for high durability • Integrated door latches are standard • Easy installation • Models for mechanical or static pressure control of airflow • Fully recyclable materials • Lower fuel cost • Drier room environment • Improved air quality #GC1140 Gravity Flow: 2,048 cfm @ 0.15 static pressure. New Rough Opening - 23.75” x 23.75”. Patent Pending. #AC3010 Actuated: 2,518 cfm @ 0.15 static pressure. New Rough Opening - 23.75” x 23.75”. Patent Pending. Revolutionary, patented design, maximized Jet technology. Four directional louvers direct air along the ceiling and hold air up longer while mixing with room air and distributing it evenly. Features patented inlet design. Creates less draft and chilling and is engineered to allow more CFM through inlet than a C2000. TopJet inlets operate at higher static pressure for better air mixing. The snap-together design allows for minimal worksite waste. Rated at 1,812 cfm at .125 sp. Patent No. 6,475,078 #DL90640.....................Jet Ventilation Ag Roof Vent Call for special pricing for large quantities and installation quotes! Pre-mounted actuation pulleys for simple and consistent installation. Single rod actuation. Durable corrugated plastic insulation stop. End panels designed to prevent air discharge from the ends of the inlet. A unique aerodynamic discharge orifice provides improved efficiency and air speed while routing condensation away from the air stream to prevent freeze up. Improved performance at a horizontal airflow to prevent drafting of pigs. Actuated Plastic Ceiling Inlet Item# Air @ .10 SP Framed Opening #GACI-4000P2 4000 CFM 19” W x 46.5” L #GACI-2500P2 2500 CFM 19” W x 27” L Traditional four-way negative pressure ceiling inlet. Quad inlet is made of UV stabilized polystyrene. The quad inlet is assembled from four single directional inlets, PVC mounting frame, 18-inch attic sleeve, and one-inch polystyrene insulation board. Single directional inlets are manually adjusted to direct air along the ceiling, towards the floor or closed. During minimum ventilation the quad inlet will deliver 500 crm at 0.05 in of water. Overall Size: 31” x 31” 9” Packaging: Unassembled. Rough Opening: 27 7/8” x 27 7/8” 4-Way Ceiling Diffuser #HSI2000.................................................. 4-way Inlet #HSI200.................................... Single Sidewall Inlet #HSI204.......................................................... Housing #HSI202.............................................. Insulation Stop #HSI203............................................ Insulation Board #HSI205....................................................... Blade Top #HSI206................................................. Blade Bottom #HSI207. ................................ Pin Pivot for Top Blade #HSI208........................... Pin Pivot for Bottom Blade #6088611................................Screw 1” Self Tapping Jet Ventilation Ag Roof Vent #AC3010 #GC1140
RkJQdWJsaXNoZXIy MTA3MzU=