54 WWW.HOGSLAT.COM Cumberland 90° Corner - #G07097523C 1) #HS07099370...................................................................Bolt w/ Grease Zerk 2) #G4546-P...................................................................................... Plastic Cover 3) #G07098281...................................................................... Pivot Pin Assembly 4) #G07101494........................................................Corner wheel with Bushing 5) #G07097574B.......................................................................Corner Weldment 6) #G07097697.........................................................Corner Suspension Hanger #HS9036................................................................................................ 2 HP Motor #N9034............................................................................................1-1/2 HP Motor #N9035................................................................................................... 2 HP Motor Direct Drive Chain Feeder Motor • 1750 RPM • 230 Volts Belt Drive Chain Feeder Motor • 1750 RPM • 115/230 • 56 Frame • Manual Reset WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov 1 2 3 4 5 3 6 Item# Item Name (HWF1938) Stand Qty needed per #HWF1938 Leg stand for chain feeder support 19.5” tall w/o hardware 1 #60580 Washer flat commercial 5/16 x 3/4 SS 4 #97337304SS Bolt U Round 5/16-18 x 1-7/16” x 2.73” 304SS 3 #9731240503 Bolt U 5/16” x 1-3/8” ID x 2-1/2” 3 #605071 Bolt hex cap 5/16-18 x 1/2” Grade 5 zinc 10 #60681 Nut lock hex nylon insert 5/16-18 zinc 4 #617202 Pipe tube 1.315” OD x 10’ 16ga galv w/crimp-perching roost varies on length #6172024 Pipe tube 1.315” OD x 24’ 12ga galv w/crimp-perching roost varies on length #HSFC2C-1R......................................................................................... Wheel Assy 90° Corner #HSFC2C-2R............................................................................................Shaft Assy #HSFC2C-3R.........................................................................................Ball Bearing #HSFC2C-4R............................................................................................ Shaft Seal #HSFC2C-6R..........................................................................................Clear Cover #HSFC2-2.....................Composite wheel and shaft kit for original 90° Corner
RkJQdWJsaXNoZXIy MTA3MzU=