9 GROWERSELECT Extended Anchor Bearing Eliminate problems with auger breaking and plugging when feeding out of the front bin of a tandem system. With the extended anchor bearing you can open the slide gate and remove restrictor baffles that cause bridging. The standard anchor bearing features a restrictor tube to prevent the core of the auger from overfilling. The extended anchor simply extends the restrictor tube forward to the front bin. Remove the existing anchor bearing on the back bin. Cut the 14’ galvanized tube to length extending 2” past the front unloader. Slip the cut tube inside the auger core and attach the new bearing to the rear bin unloader. Without Extended Anchor With Extended Anchor #HSAB75E-10.................................for M75 for GSI (must also order Part #HSAB75E-8) #HSAB75EC-10......for M75 Chore-Time, GrowerSELECT (must also order Part #HSAB75E-8) #HSAB75E-8..........................................14’ Galvanized Tube for Extended Anchor Bearing Item # Description Chore-Time® AP® Big Dutchman® Valco® Auger Gear Heads HSGR001 352 RPM, Mdl 55 3261-5 - - - HSGR002 352 RPM, Mdl 75/90 3261-7 - - - HSGR003 358 RPM, Poultry w/ clamp - 0040408 - - HSGR004 358 RPM - FLX-4277 - - HSGR005 216 RPM - - - - HSGR009 358/296 RPM at 60/50 Hz - 58 - - 11-00-1005A - HSGR010 693/573 RPM at 60/50 Hz 3261-17 - - - HSGR011 266/222 RPM at 60/50 Hz - 58 - - 86-00-2667 - HSGR012 266/222 RPM at 60/50 Hz - FLX-4403 - - HSGR014 441/364 RPM at 60/50 Hz - 78 - FLX-4405 - - HSGR015 256/213 RPM at 60/50 Hz - 58 - - - - HSGR016 216/179 RPM at 60/50 Hz - 58 3261-1 - - - HSGR017 156/130 PRM at 60/50 Hz - 78 - - - - HSGR021 62/52 RPM at 60/50 Hz- 78 3261-9 - - - HSGR022 657/542 RPM At 60/50 Hz 3/4” - - - 450369 Pinion Gears HSP01 Straight pinion, 1/2” ID - FLX-4275 - - HSP02 Straight pinion, 5/8” ID - FLX-4276 11-00-9364 - HSP03 Helical pinion, 1/2” ID 5046 - - - HSP04 Helical pinion, 5/8” ID 6104 - - - HSP05 Straight pinion, 1/2” ID 3249 - - - HSP06 Straight, 1.812” long, 1/2” ID - FLX-2983 11-00-9151 - HSP07 Straight, 14 tooth x 2.25” long, 5/8” ID - FLX-2973 86-00-0205 - HSP08 Straight, 14 tooth x 3” long, 5/8” ID - FLX-4542 - - HSP09 Straight 14 teeth 1/2” bore 2.170” long - - 10-00-9613 450366 Use of Original Equipment Manufacturer part numbers is for reference only. Item # Description Chore-Time® AP® Big Dutchman® Valco® #HSP03 #HSP01 Flexible Drop Tube Item # Description Chore-Time® AP® HSFLX-2563F 3” ID, galv. (25’ roll) 7497 FLX-2563 HSFLX-2564F 3-1/2” ID, galv. (25’ roll) 6383 FLX-2564 HSFLX-4240 3.406” ID x galv. (12” Long) 1 FLX-4240 #52776........................................................3” ID, 3.35 OD flexible tube, clear #52777...................................................................3-1/2 ID, flexible tube, clear Clear Flexible Drop Tube WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
RkJQdWJsaXNoZXIy MTA3MzU=