132 WWW.HOGSLAT.COM WHEN CONCRETE GETS “UGLY”, VANTEK PRODUCTS ARE “PROVEN” SOLUTIONS! PADS Before SLATS TROUGHS Before Before After After After #VTK1003.........................................................................50 lb. Bag (56/pallet) #VTK1004.....................................................50 lb. Powder in Pail (24/pallet) #VTK1005C.....................................................50 lb. kit w/ Acrylic Resin and Slow Set (24/pallet) V-KRETE V-Krete is a premium fast-set mortar specifically designed for resistance to animal wear and chemical attack in agricultural facilities. Its unique properties outperform conventional patching and repair materials and make it ideal for everything from light surface wear to deeper repairs. #VTK1010............................50 lb. Bag (56/pallet) V-KRETE Leveler V-KRETE LEVELER is a one-component, shrinkage compensated, polymer modified, special blend of cements, aggregates and performance enhancing additives. This pure cement-based mortar is rapid setting and used for horizontal restoration. Just mix with 1 gallon ACRYLIC RESIN on site. It can be extended for larger repairs. This formula does not harden in bags due to moisture and compaction. Coverage: 17 sq. ft. at 1/4” thickness. #VTK1008C................................................................................................1 gallon Jug (2/box) #VTK1007C.........................................................................................5 gallon Pail (24/pallet) A.R.C. (Acrylic Resin Concentrate) A.R.C ACRYLIC RESIN is a special blend of acrylic polymers designed to enhance bonding of mortars as a primer and to resist absorption of harmful elements as an admix blended with water. Typical use is 1 part Resin to 3 parts water. One gallon of AR for 4 bags V-KRETE or SLAT PATCH. #VTK1002A.............................................................................................50 lb. Bag (56/pallet) #VTK1001A...........................................................................50 lb. Powder in Pail (24/pallet) Slat Patch VANTEK SLAT PATCH is an economical choice for routine repairs on slats and other concrete surfaces. Blend with pea gravel or small rock to fill deep holes or overlays more than 1- 2” thick. This formula does not harden in the bag due to moisture or compaction. Coverage: 16 sq. ft. at 1/4” thickness. #VTK1009.........................................................................................................1 Pouch (50/box) Slow Set SLOW SET additive is designed to provide applicators extended working times with V-KRETE mortars during hot weather conditions. One pouch per gallon of mixing liquids extends working time approximately 15-20 minutes. WALLS Before FLOORS Before After After VANTEK Concrete Restoration and Protection #VTK1005C A non-slump formula allows easy rebuilding of edges and vertical surfaces, while its durability stands up to livestock traffic, salts, and mild chemicals. V-Krete comes premixed and requires only potable water, delivering faster project completion compared to conventional repair products. For deeper holes or overlays thicker than 1–2”, it can be blended with pea gravel or small rock. This formula also resists hardening in the bag due to moisture or compaction. Coverage: 16 sq. ft. at 1/4” thickness. CONCRETE REPAIR #VTK1016..........................................................................50 lb. Pail (24/pallet) V-KRETE V/O Vertical Overhead Mortar V-KRETE V/O is a single component, polymer-modified, cement-based mortar for structurally repairing deteriorated concrete. Use on vertical or overhead surfaces for repairs from feather edge to 2 inches or apply in lifts for deeper applications. Coverage: 4 sq. ft. at 1” thickness.
RkJQdWJsaXNoZXIy MTA3MzU=