133 FLOORING V-GARD EPOXY OVERLAY SYSTEM FROM VANTEK “PROVEN” TO OUTLAST ALL OTHERS! WALLS Before SLATS FLOORS Before Before After After After #VTK3007 ......................................................................................................32 lb. Bag ADMIX #VTK3010 ..........................................................................................50 lb. Bag BROADCAST #VTK3003 ........V-GARD SLURRY KIT (1.5-gal kit of 440LV Epoxy and 32 lb. bag of Admix in a pail) Note: a 50 lb. bag of Broadcast needs to be ordered to complete the V-Gard system. V-GARD SLURRY & BROADCAST OVERLAY SYSTEM V-GARD combines the hardness and chemical resistance properties of 440LV Epoxy with the added wear resistance of Vantek ADMIX and BROADCAST aggregate blends. The ADMIX is designed to create a uniform semi self-leveling slurry for simple application. The BROADCAST (50 lb. bag) is applied to the wet epoxy until the surface looks dry. The basic batch mix combines 1.5 gallons of 440LV Epoxy with a 32 lb. bag of ADMIX and covers 33 sq. ft. @ 3/16th” thickness. #VTK3012 ........................0.5-Gallon Kit (Pre-measured) – Admix ordered separately #VTK3004 ........V-STONE MORTAR KIT (0.5-gal kit of 440LV Epoxy and 32 lb. bag of Admix in a pail) V-STONE EPOXY MORTAR V-STONE combines .5 gallons of 440LV Epoxy with a 32 lb. bag of ADMIX to make a trowel applied mortar that has vertical stability similar to V-KRETE mortar. This one-step mortar has superior hardness and chemical resistance like V-GARD. This is a much stiffer mix, so a heavy-duty mixer is required. Coverage: 16 sq. ft. at 1/4” thickness. #VTK3011 ....................................................................................1-Gallon Pail of Fumed Silica #VTK9013.......................................................................................20 lb. Bag of Fumed Silica CSS The CSS (Concrete Surface Saver) SYSTEM is a blend of 440LV Epoxy and Fumed Silica thickener that is designed for thinner overlays or wall coatings that can be easily roll coat applied. Stop erosion of lightly worn floors and walls. Fix cracks permanently. Mix 1.5 gallons of 440LV Epoxy with a 1-gallon pail of Fumed Silica, pour the thickened slurry on the substrate and roll coat followed by broadcast. Coverage: 90 sq. ft. at 1/16” thickness, 45 sq. ft. at 1/8” thickness. Before After Pad with V-Stone VANTEK Concrete Restoration and Protection EPOXY SYSTEM OVERLAYS & REPAIR MORTAR Slat Pros HOG/CATTLE SLAT & BEAM REPLACEMENT COATINGS & REPAIRS 712-348-4590 VTK3003 VTK3004 CONCRETE REPAIR
RkJQdWJsaXNoZXIy MTA3MzU=