CON-KORITE™ SSL Kit

Fast Set Leveling & Low-Shrink High-Strength Repair Mortar

Con-Korite SSL is a fast-setting, extra abrasion resistant, high-strength, leveling and low-shrink mortar. It can be used as an interior & exterior patching material or to level concrete surfaces. It can also be used for floor overlays. When mixed with KB25 Acrylic Resin, it produces a repair with very good resistance to wear and compounds containing corrosive compounds.

Con-Korite SSL Kit includes: 50 lbs. (22.7 kg) pail containing 1 gal. (3.8 L) KB25 Acrylic Resin & 44 lbs. (20.0 kg) mortar

General Uses:

Plant Floors, Parking Ramps, Roadways, Walkways, Concrete Tanks, Feed Bunks & Mangers, Gutters & Troughs, Parlor Floors

Typical Coverage:

18 sq. ft. (1.7 m2) at 1/4” (.64 cm) per 40 lb. (18.2 kg) batch 

• Fast setting - Ready for use within 2 - 3 hours at 70°F (21°C)
• Water, Salt & Sulfate tolerant - Withstands tough conditions
• Exceptional abrasion resistance - Stands up to heavy traffic
• Interior & Exterior use - Tolerates all weather conditions
• Non-shrink - Minimizes risk of delamination, improves bond
• High strength - 3 to 5 times stronger than other products

Con-Korite can be used with water only. However, for added resistance to absorption and to provide a greater bond for overlays, Con-Korite can be combined with KB25 Acrylic Resin. Just add the resin to water and then mix with the mortar or apply to the substrate as a primer.

General Use: 1 part KB25 to 2-3 parts water.

½ inch overlays: 1 part KB25 to 1 part water

Edging, corrosive elements exposure and thin repairs: Straight KB25.

To grout (over 1 inch): Water Only

Con-Korite Product Information Flyer

Con-Korite SSL Product Information Data Sheet

Notice: Shipping estimates at checkout may not be accurate due to weight. Large orders of this item may ship on a pallet or by motor carrier. You will be contacted with an accurate shipping amount after placing your order if it is different than what is calculated during checkout.