4 VENTILATION SYSTEMS AS-54XEBDLP 54”, w/o cone PVC 58” x 60.5” 1725 Belt Single 1-1/2 AS-54XEBDLP-V 54” w/VFD, w/o cone PVC 58” x 60.5” 1725 Belt Variable 1-1/2 (3 Ph) AS-54XEBDLP-HE High Efficiency Conversion Kit AS-54206 54” Poly Cone MODEL DESCRIPTION SHUTTER ROUGH OPENING RPM DRIVE SPEED HP MODEL TEST CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT BESS 0.00” SP 0.05” SP .10” SP .15” SP *Performance shown with no cone AS-54XEBDLP 17263 30,900 20.8 29,400 19.1 27,600 17.4 25,600 15.7 AS-54XEBDLP-HE 17265 28,500 23.2 26,700 20.9 24,400 18.6 21,700 16.1 AS-54XEBDLP 17264* 28,100 18.0 26,400 16.5 24,600 15.0 22,700 13.6 The 54" AirStorm X-Brace fan was designed putting an emphasis on using corrosion resistant materials to reduce maintenance costs and downtime, while also delivering improved CFM performance under standard operating static pressures in modern hog and poultry barns. The 54" X-Brace model fan is a through-wall mount design with a gel coated fiberglass housing, optional poly discharge cone and an improved plastic vane shutter. Fabricated with a heavy PVC frame, reinforced corners and a generous 1" flange. The PVC vanes feature a true airfoil pattern and spring steel rods extending the entire length of the shutter with unique lockdown ends. Flat Performance Curve The X-Brace fans feature a proprietary stainless steel prop configured for peak air delivery at typical operating static pressures. The fan prop delivers the most efficient CFM ratings between 0.05" and 0.15" W.C. static pressures. Efficient Drive System The 54" X-Brace fan is powered by a high service factor GrowerSELECT 1.5 HP motor. A self-adjusting tensioner automatically keeps the 1/2" link belt at the proper tightness for maximum efficiency. Improved Shaft Bearing Life A new, solid base pillow block shaft bearing housing provides a more stable mount and significantly reduces vibration. The new bearing also features a double-lip FloBack seal to reduce the possibility of being pushed out by over-lubricating, reduce outside contamination and increase lubrication by directing grease back toward the balls and raceways during operation, extending bearing life. Rigid X-Brace Support The innovative new X-Brace support is constructed of aluminum tubing with blue epoxy coating and a triangle edge profile to reduce wind turbulence. The X-Brace design moves the fan brace anchor points to the corners of the fiberglass housing, providing maximum rigidity, and features rubber frame mounts to cushion the fiberglass fan housing from vibrations. The stainless steel motor and shaft bearing mount is secured to the X-brace with stainless steel hardware and provides a stable corrosion resistant platform for the 1.5 HP GrowerSELECT fan motor. Low Maintenance Shutter • Rugged Fiberglass Housing • Stainless Steel Fan Blade • PVC Interior Shutters AirStorm X-Brace 54” Fan AirStorm X-Brace 51” Fan AS-51XEBDLP 51” w/o cone PVC 55” X 55” 115/230 Belt Single 1-1/2 AS-51XEBDLP-V 51 w/o cone w/VFD PVC 55” X 55” 230/460 Belt Variable 1-1/2 AS-54206 51” Poly Cone MODEL DESCRIPTION SHUTTER ROUGH OPENING RPM DRIVE SPEED HP MODEL TEST CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT BESS 0.00” SP 0.05” SP .10” SP .15” SP AS-51XEBDLP 18216 27,400 17.6 26,100 16.5 24,600 15.1 22,900 13.7 • Heavy-Duty Poly Cone • High Service Factor Motors WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
RkJQdWJsaXNoZXIy MTA3MzU=