Hog Slat Inc. Newton Grove, NC USA February 2025 13 Air Storm Fans 12. This step requires (2) installers. Hook the butterfly assembly on the top of the outside of the orifice. Ensure the vertical support is properly aligned and the butterfly is oriented correctly (SEE BELOW IN RED) before continuing. Manipulate the orifice inside the butterfly assembly and loosely attach the mounting brackets with lock nuts. Press butterfly onto the fan assembly until the edge of the throat bottoms out against the vertical and horizontal members of the butterfly assembly. At this time also inspect tightness of fit of the butterfly to the orifice. BE SURE TO VALIDATE BUTTERLFY ORIENTATION AGAIN! SPRING ATTACHMENT BOLTS SHOULD BE ORIENTED TOWARDS THE GROUND.
RkJQdWJsaXNoZXIy MTA3MzU=