GrowerSELECT AS-36E Series Airstorm Fiberglass Fan Installation Manual

Hog Slat Inc. Newton Grove, NC USA November 2019 8 Air Storm Fans Assembly 1. Remove packaging from Fan and cone if applicable. • Locate hardware kit(s) and supplied literature and store for later use. • Ensure not to damage the fan or components during this step. 2. Remove shutter from fan housing, then from the inside of the building insert fan shroud into rough opening. 3. Using supplied #14 Sheet Metal Screws (805060), secure housing to framework. • A total of 8 fasteners are recommended to completely secure fan. Each corner should be secured along with the midpoint between each corner. • Ensure adequate room is allowed to the inside of the fasteners for the shutter to mount flush to the fan housing.