GrowerSELECT - HS569A Poultry Feed Line Hopper Assembly Installation Manual
Hog Slat Inc. Newton Grove, NC USA March 2019 1 Feed Line Hoppers Feed Line Hoppers Assembly Instructions HS569A-120, HS569A-200, HS569A-300 (Spanish Version Included/ Versión en Español Incluida) General Installation Notes: Make sure that power is disconnected from system prior to servicing. Installation of this equipment and related OEM equipment should be in accordance with these instructions, OEM’s installation instructions and local codes (if applicable). Failure to follow specified instructions may cause damage to equipment and/or personal injury or death. Take special note of any Warnings or Safety Decals on the equipment and in manuals. Always wear protective clothing and any applicable Personal Protective Equipment (Safety Glasses and/or Ear Plugs) when working with the equipment. Discarded materials, equipment and boxes should be recycled in accordance with local and national codes. Unless otherwise specified, all Feed Delivery Systems (Diameters) are installed similarly. Safety Instructions: Read all safety messages in this manual and on equipment safety decals. Follow recommended precautions and safe operating practices. Ground all electrical equipment for safety. Ground all non-current carrying metal parts to guard against electrical shock. Always keep safety decals in good condition and replace missing or damaged decals. Overview: The GrowerSELECT HS569A Feed Line Hopper series is intended for use within the feed systems and is designed to provide optimum capacity with exceptional durability. Available hoppers provide 120, 200, or 300 pounds of feed storage capacity while eliminating bulk for increased maneuverability. The multiple suspension system allows for the hopper(s) to be suspended by either 1 point or 2 point methods, although it is recommended for the 200 and 300 pound hoppers to use both suspension methods for extra support and stability.