Hog Slat Inc. Newton Grove, NC USA March 2022 11 Evaporative Cooling System OFFSET BRACKETS Figure 9 Some applications of the H2 Cool System require a 12” Offset Support Bracket to allow for movement of curtains either directly behind or directly in front of the cool cell system. Figure 9 above depicts the void that can be generated by utilizing the Offset Brackets (8490180700) over the standard brackets (HSES-27). • Due to the weight of the system being extended from the building a minimum on center bracket spacing of 4 feet is recommended. • Additional wood supports may be required below recommended 2”X10” to allow for the extended length of the mounting section of offset brackets. A 2”X4” is shown installed below the 2”X10” in Figure 6 above.
RkJQdWJsaXNoZXIy MTA3MzU=