Hog Slat - HS729 Drip System Control Installation Manual

Hog Slat Inc. Newton Grove, NC USA November 2018 1 Cooling System Control HS729 Control Drip System Without 24 Hour Timer (Spanish Version Included/ Versión en Español Incluida) General Installation Notes: Make sure that power is disconnected from system prior to servicing. Installation of this equipment and related OEM equipment should be in accordance with these instructions, OEM’s installation instructions and local codes (if applicable). Failure to follow specified instructions may cause damage to equipment and/or personal injury or death. Take special note of any Warnings or Safety Decals on the equipment and in manuals. Always wear protective clothing and any applicable Personal Protective Equipment (Safety Glasses and/or Ear Plugs) when working with the equipment. Discarded materials, equipment and boxes should be recycled in accordance with local and national codes. Safety Instructions: Read all safety messages in this manual and on any equipment safety decals. Follow recommended precautions and safe operating practices. Ground all electrical equipment for safety. Ground all non-current carrying metal parts to guard against electrical shock. Always keep any safety decals in good condition and replace missing or damaged decals. Overview: The HS729 Control Drip System with Timer assembly is designed at 120V 60 Hz for controlling spraying or dripper systems. System assembled onto 1/2” poly board using standard plumbing fittings. An adjustable 0-30 minute timer with independent on/off knobs provides selection of actual run time. Thermostat allows system to be operated at a certain temperature.