Hog Slat Inc. Newton Grove, NC USA SEP 2025 REV A2 9 Ventilation System 6. Take end of the ribbon cable and align the connector with the connector on the bottom board in the same location as the original ribbon cable was removed. When it is aligned, slowly press down in the center of the connector until the side latches fold up and lock the connector in place. 7. The new touchscreen requires an auxiliarly power supplied (included) The screen will not turn on until this is connected. Connect the RED lead to the AUX (+) terminal and the BLACK lead to the AUX (–) terminal found on the back of the newly installed front door assembly.
RkJQdWJsaXNoZXIy MTA3MzU=