Hog Slat Inc. Newton Grove, NC USA AUG 2025 REV A5 28 Ventilation System SECTION 12: IMPORTING AND EXPORTING DATA To import or export SETTINGS, access data port by opening front door. Access the USB data port located on the back of the front door near the bottom of the circuit board. Insert flash drive provided with controller. A USB style plug icon will appear on the screen. On the SETTINGS SCREEN press IMPORT / EXPORT SETTINGS. Follow on-screen instructions which will allow user to acknowledge importing or exporting to the flash drive. EXPORT is when you wish to save the controller settings to the portable flash drive. IMPORT is when you wish to save the portable flash drive data to the controller. This will overwrite any existing settings in the controller and replace them with the data from the flash drive. When file transfer has completed, screen will be displayed indicating Import or Export is complete. SECTION 13: FACTORY RESET In the event it is desired to return the controller back to factory default settings, a FACTORY RESET can be performed. Go to SETTINGS PAGE and find the ICON “FACTORY RESET.” Press the icon and a new page will be launched for you to confirm the factory reset. Press “YES” for at least 2 seconds and controller will be returned to its factory state. Controller ID #
RkJQdWJsaXNoZXIy MTA3MzU=