Hog Slat Inc. Newton Grove, NC USA MAY 2026 REV A3 4 Ventilation System ALARM ZONE PROBE ERROR 24 PROBES PAGE 24 SELECT ACTIVE PROBES 25 TEMPERATURE /MIN VENT CURVES PAGE 25 IDLE PAGE 28 SECTION 11: PC INTERFACE 29 SECTION 12: IMPORTING AND EXPORTING DATA 30 SECTION 13: FACTORY RESET 30 SECTION 14: BATTERY BACK UP 31 SECTION 15: SOFTWARE UPDATE 31 SECTION 16: REPLACEMENT PARTS 32 SECTION 17: STAGE OPERATION GRAPH 33-34 SECTION 18: CONTROLLER PARAMETER VALUES/RECORD USER SETTINGS 35 SECTION 19: MOTOR CURVE 36 SECTION 20: TROUBLESHOOTING GUIDE 38 SECTION 1: OVERVIEW The HSVC1115F-2C5A can replace the top board of a TC5- 1N5F1AB controller and not only replace a failed board but also provide an upgrade to the existing controller. Model HSVC1115F -2C5A is a front door assembly that replaces the entire front door of the TC5 controller and includes everything needed. The new front door will now feature a touchscreen for easy programming and set up. All features available in the HSVC1115F controller can now be added to an older TC5 controller. The HSVC1115F-2C5A incorporates one (1) natural ventilation curtain control and five (5) power ventilation/heater stages. The first stage provides a variable output typically for minimum ventilation with the remaining stages being relay on/off operation. The relay stages are a combination of cooling, heating and mist cooling. Stage 3 cooling/heater can be used as a floating stage to move its operation before or after the curtain control stage. As temperature increases each stage is activated to cool the building. As temperature drops optional heat stages can be used to operate two heaters in cascading arrangement or heat two separate zones or rooms. All controlled via easy-to-read intuitive touchscreen interface. FEATURES ❖ 7” Full color touchscreen display on the front panel allows for monitoring controller status. ❖ Icon menu for easy program navigation. ❖ Home screen with status indicators for all functions
RkJQdWJsaXNoZXIy MTA3MzU=