Hog Slat Inc. Newton Grove, NC USA December 2022 11 Wind Storm Fans 8. Install Belt from Hardware Bag 11 by placing belt around tension arm and drive sheave, then rotate large pulley so the belt rotates onto the assembly. Check for proper tension, the second indicator mark on the belt tensioner is the desired operating tension. If belt lacks tension remove appropriate number of links and reinstall. ! BELT HAS AN ORIENTATION. THE CORRECT DIRECTION OF ROTATION IS INDICATED ON THE EXTERIOR FACE OF THE BELT WITH AN ARROW ! ! ENSURE ALL PULLEYS AND DRIVE COMPONENTS ARE PROPERLY ALIGNED TO ALLOW THE BELTS TO OPERATE ON THE SAME PLANE ! 9. Hardware Kit Number 6 should be used for this step.
RkJQdWJsaXNoZXIy MTA3MzU=