GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA May 2017 22 GROW-DISK ™ Feed System GrowerSELECT HS660S Feed Line Drop Adaptor Installation 1. Determine the desired location for the Outlet Drop. Use a hole saw or uni-bit to drill outlet holes. All burrs should be removed after cutting so drop will perform properly. This is important on chain disk system as to not damage the chain disks or drop adapter. Reference Figures and Charts below. Model Item 1 Item 2 60 1-1/2” Dia. (40 mm) n/a 2. Tie an overhand knot in Cord provided located at center of Cord length. Assemble Cord with Knot into retainer pocket of the Shutoff making sure that cord is fully seated in slots.