The HS820 infrared feed line control mounts to drop tubes and manages the fill system operation.

Adjustable GrowerSELECT® feed hopper level control uses a proximity sensor to monitor feed levels and control fill system activation.

The HS765 Multi-Hopper Switch Isolator allows for the connection of up to four hopper level switches to one location providing a single Normally Closed (N/C) output. The output can be connected to an Auger Drive Control Unit such as Grower Select HS693 or any control unit containing an isolation relay to control the operation of the auger motor.

Regulates feed level in poultry feedline hoppers.

Regulates feed level in poultry feedline hoppers. Designed to be used in round plastic hoppers like the HS829 series.

Simple feed level control mounts to drop tube below power unit for accurate control of flexible auger feed systems. Includes built-in start delay timer.

Controls feed system fill motors to manage available feed levels in poultry hoppers and swine feeders.

12 pound capacity control sow drop for all models with Proxy Plus sensor. 230 Volts

Feed system control unit for all flexible auger models. No relay switch.

Feed system control unit for all flexible auger models. Built in time delay feature. No relay switch.

230 Volt flexible auger feed system control unit unit with relay switch, drop cone and diaphragm micro switch for feed detection. Drop cone outlet is 3.25" outside diameter. For models 55, 75 and 90 fill auger.

GrowerSELECT® Control Unit Switch Assembly with built in time-delay capability. Designed for use with a flexible auger feed system where control of the drive auger motor is required. Can also be used as an alternative replacement for other OEM control unit applications.

GrowerSELECT® Control Unit Switch Assembly with built in time-delay capability. Designed for use with a flexible auger feed system where control of the drive auger motor is required. Can also be used as an alternative replacement for other OEM control unit applications.

GrowerSELECT® Control Unit Switch Assembly. Designed for use with a flexible auger feed system where control of the drive auger motor is required. Can also be used as an alternative replacement for other OEM control unit applications.

GrowerSELECT® Control Unit Switch Assembly. Designed for use with a flexible auger feed system where control of the drive auger motor is required. Can also be used as a direct replacement for other OEM control unit applications.

GrowerSELECT® feed line control unit switch replacement kit for flexible feed auger systems. 230V single phase.

This delay relay kit is designed to provide a "start-up delay" to prevent fill system auger drive motor from short-cycling. Works with relay and non-relay type auger control units.

Prevent auger motor from short cycling and causing premature motor failure. Contains internal relay.

Prevent auger motor from short cycling and causing premature motor failure.

2 wire AC/DC 30mm diameter proximity sensor for hog and poultry feed/fill systems. Normally closed.

Replacement proximity sensor feed line control features isolated circuit protection, built in time delay and push button control.

Replacement 230V proximity sensor switch for Chore-Time® part number 34255.

Mounting kit for the GrowerSELECT® Proxy Plus proximity sensor (Item # HS10)

Body assembly for GrowerSELECT® HS593/HS693 feed line control units.