Grower SELECT® Feed Line Control Unit W/ Relay

230 Volt flexible auger feed system control unit unit with relay switch, drop cone and diaphragm micro switch for feed detection. Drop cone outlet is 3.25" outside diameter. For models 55, 75 and 90 fill auger.

Comparable to AP® part number: FLX-4496 (not a direct replacement).
*Use of manufacturer part number for reference purposes only

See RELATED PRODUCTS below for replacement cone and switches.

Installation, Wiring and Parts Manual for GrowerSELECT® Feed Line Control Unit 230V Single Phase - HS693 

Note: Proper use of time-delays in fill systems eliminate the opportunity for fill system motors to short-cycle. Short-cycling a motor is any cycle that does not allow the motor to be off for a MINIMUM of 1-minute between starts. Short-cycling of a fill system motor will result in increased operational heat and cause thermal tripping followed by component failure. Testing indicates that short-cycling will result in 10x shorter motor life compared to units run with acceptable cycle rates.