Hog Slat - HSVC1115F-2C5A Ventilation Controller Installation Manual

Hog Slat Inc. Newton Grove, NC USA MAY 2026 REV A3 6 Ventilation System Note: Ventilation Controller is to be wired in accordance with all applicable local and national electrical wiring codes. All wiring sizes and fuse capacities are to be sized according to applicable electrical code specifications or other regulations. SECTION 4: SAFETY INSTRUCTIONS Read all safety messages in this manual and on equipment safety decals. Follow recommended precautions and safe operating practices. Ground all electrical equipment for safety. Ground all non-current carrying metal parts to guard against electrical shock. Always keep safety decals in good condition and replace missing or damaged decals. Pay Attention. Take the time to read and understand this as it may save you time later. Recommended operating temperature range is between 0° C and 40°C (32104°F). The control must be placed in a temperature controlled environment. It must NOT be located outside or in an area where the temperature may go outside the recommended range. Heating or air-conditioning may be required to ensure this condition is met. FOR INDOOR USE ONLY Danger. Failure to follow these instructions may create an electrical hazard and may cause damage and/or personal injury or death. Do not install the controller in the room with the animals. Do not place control boxes near water lines. Shut off all power to the controller before servicing. A switch or circuit breaker must be included in the installation. Place controller in a suitable and easily reached location. Warning. Failure to follow these instructions will void the warranty and may cause significant damage such as fire or animal loss.

RkJQdWJsaXNoZXIy MTA3MzU=