Hog Slat Inc. Newton Grove, NC USA December 2022 7 Wind Storm Fans Assembly 1. Remove packaging from fan and cone if applicable. • Locate hardware kit(s) and supplied literature and store for later use. • Ensure not to damage the fan or components during this step. Locate bottom fan support (WS-54304) and place centered in bottom of rough opening with flange facing outward as shown below. Attach with #14 Sheet metal screws (805060) to secure. NOTE: This support aids in mounting. After completion of installation the support does not carry any structural load. 2. 3. Assembly Venturi (WS-54309), Cone support (WS-54314), and Cone Brace (WS-54315) as shown below using Truss head bolts with the bolt heads on the interior facing face of the Venturi. Parts List Item Quantity Part Number Description 1 4 WS-54314 Bracket, Cone Support Panel Fan 2 4 WS-54315 Brace, Cone Support Panel Fan 3 16 607182 Screw Slotted Truss 5/16”-18 X 1” M/S Gr2 Zinc 4 16 606241 Nut Serrated Hex Flange 5/16” -18 Zinc Repeat all 4 corners
RkJQdWJsaXNoZXIy MTA3MzU=