Hog Slat Inc. Newton Grove, NC USA December 2022 8 Wind Storm Fans 4. This step require (2) installers. Place bottom of fan assembly into flange of bottom support, rotate until fan interior face of fan mates with the wall then secure using sheet metal screws (805060) 5. Remove bolts in motor plate holes, rotate motor plate into position and secure with bolts previously removed. 6. Remove motor from packaging and install on motor plate positioned as far forward as possible. Use fasteners secured to motor plate. *ATTN: the motor pulley is pre aligned but alignment should be verified in next step.
RkJQdWJsaXNoZXIy MTA3MzU=