Skip to main content.
We are currently working on making our websites more accessible. If you have any issues navigating our site, please feel free to contact us via phone at 910-594-0219 and ask for the web ordering department.
Close
Show your wishlist 0
You have no items in your shopping cart.
Search
Filters
GrowerSELECT® 15 oz (450ml) gear oil for lubricating gear heads on power drive units.
Manufacturer: Grower Select
SKU: HS450
$9.06

This Gear Oil is formulated to work with Hog Slat GrowerSELECT Gear Reducers for both fill systems and feed systems. It provides excellent lubrication properties, contains extreme pressure (EP), anti-corrosion and anti-oxidation additives for prolonged gear life and smoother operation. SAE 80w-90.

Replacement for AP®/Cumberland® part number: FLX-4471
*Use of manufacturer part number for reference purposes only

Filling Instructions (Before starting Motor):

  1. Remove Vent Plug from top of Gear Reducer.
  2. Remove Oil Level Plug from side of Gear Reducer.
  3. Fill Gear Reducer through Oil Level Plug on side with approximately 13 oz (390 ml) of oil until oil level is even with Oil Level Plug. Note: Do not use Vent Plug (Top Plug) to fill Gear Reduces as this allows for overfilling.
  4. Replace Oil Level Plug and Vent Plug and tighten securely.

Warning: This product may cause skin or eye irritation. For eye contact, flush with water for at least 15 minutes. Seek medical attention if film or irritation persists. Avoid prolonged contact with skin. Thoroughly wash contact area with soap and water. If swallowed, DO NOT INDUCE VOMITING. Obtain medical assistance immediately.

For Health Emergencies: Call National Poison Center at 1-(800) 222-1222
Be Environmentally Responsible: Do not pollute. Please recycle used oil and bottle.

Note: Bottle design may vary between blue or clear plastic

This Gear Oil is formulated to work with Hog Slat GrowerSELECT Gear Reducers for both fill systems and feed systems. It provides excellent lubrication properties, contains extreme pressure (EP), anti-corrosion and anti-oxidation additives for prolonged gear life and smoother operation. SAE 80w-90.

Replacement for AP®/Cumberland® part number: FLX-4471
*Use of manufacturer part number for reference purposes only

Filling Instructions (Before starting Motor):

  1. Remove Vent Plug from top of Gear Reducer.
  2. Remove Oil Level Plug from side of Gear Reducer.
  3. Fill Gear Reducer through Oil Level Plug on side with approximately 13 oz (390 ml) of oil until oil level is even with Oil Level Plug. Note: Do not use Vent Plug (Top Plug) to fill Gear Reduces as this allows for overfilling.
  4. Replace Oil Level Plug and Vent Plug and tighten securely.

Warning: This product may cause skin or eye irritation. For eye contact, flush with water for at least 15 minutes. Seek medical attention if film or irritation persists. Avoid prolonged contact with skin. Thoroughly wash contact area with soap and water. If swallowed, DO NOT INDUCE VOMITING. Obtain medical assistance immediately.

For Health Emergencies: Call National Poison Center at 1-(800) 222-1222
Be Environmentally Responsible: Do not pollute. Please recycle used oil and bottle.

Note: Bottle design may vary between blue or clear plastic

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Write your own review
  • Bad
  • Excellent
Customers who bought this item also bought

Hog Slat® Poly Heat Lamp Plastic Hanger

SKU: HS664-5
Replacement plastic hanger for the Hog Slat® Poly Heat Lamp (Item # HS664)
$1.02

3/16" SS Cable Clamp

SKU: 617331
3/16" Stainless Steel Cable Clamp
$1.43

1/4" x 1" Bolt SS

SKU: 60686
1/4" x 1" Bolt Stainless Steel
$0.09

1/2" Locknut SS

SKU: 60693
1/2" Locknut Stainless Steel
$0.59

1/2" x 3" Bolt SS

SKU: 60539S
1/2" x 3" Bolt Stainless Steel
$1.87