Close
0
You have no items in your shopping cart.
Search
Filters
The GrowerSELECT pump features a re-designed VORTEX IMPELLER resulting in a unit with a LOWER HEAD PRESSURE with HIGHER VOLUME. This combination allows a Grower Select pump to service a longer cool cell run.

~ Scroll down for pricing and options ~

Manufacturer: Grower Select®

Get 3/4 hp performance from a 1/2 hp pump!

Electrical usage is decreased by up to 25%.


Pumps typically used for cool cell systems are adapted from other industries; waste water, sump pumps, etc. They are designed with a higher head pressure and low volume to lift water as high as 35’....designed to pump water out of a basement.

We went to one of America’s leading pump manufacturers with a request to build a pump specifically designed for cool cell systems.  The GrowerSELECT pump features a re-designed VORTEX IMPELLER resulting in a unit with a LOWER HEAD PRESSURE with HIGHER VOLUME.  This combination allows a Grower Select pump to service a longer cool cell run. 

Grower Select Cool Cell Pump Chart

RUGGED SPECS.

  • Oil-filled motor
  • Epoxy coated, cast iron housing
  • 2” discharge with 1 ½ bushing to adapt to most systems
  • 2” bottom suction inlet
  • 15’ waterproof power cord
  • Silicon carbide seal
  • 115 / 230 Volt- 5.5/2/7 amps
  • 15.87" high x 9.5" wide


Get 3/4 hp performance from a 1/2 hp pump!

Electrical usage is decreased by up to 25%.


Pumps typically used for cool cell systems are adapted from other industries; waste water, sump pumps, etc. They are designed with a higher head pressure and low volume to lift water as high as 35’....designed to pump water out of a basement.

We went to one of America’s leading pump manufacturers with a request to build a pump specifically designed for cool cell systems.  The GrowerSELECT pump features a re-designed VORTEX IMPELLER resulting in a unit with a LOWER HEAD PRESSURE with HIGHER VOLUME.  This combination allows a Grower Select pump to service a longer cool cell run. 

Grower Select Cool Cell Pump Chart

RUGGED SPECS.

  • Oil-filled motor
  • Epoxy coated, cast iron housing
  • 2” discharge with 1 ½ bushing to adapt to most systems
  • 2” bottom suction inlet
  • 15’ waterproof power cord
  • Silicon carbide seal
  • 115 / 230 Volt- 5.5/2/7 amps
  • 15.87" high x 9.5" wide


Write your own review
  • Product can be reviewed only after purchasing it
  • Bad
  • Excellent
Grower SELECT® Submersible Cool Cell Pump 230 Volt
SKU: H2P-230S
$243.16
Grower SELECT® Submersible Cool Cell Pump 115 Volt
SKU: H2P-115S
$243.16