Ridg-Vent® Roof Vents

Ridg-Vent® roof vents are 10' Low Profile. Fully hemmed, formed 26 ga. steel in either galvanized or painted finish.  Only extends 3" above the ridge line. Features 3-3/4" nailing flange for an overall width of 16".

• 1/2" Galvanized Mesh

• All Exposed Edges Hemmed

• Rain Diverter (Metal)

• Continuous Drainage Space

• 2" Nailing Flange

• Ideal for large attic or entire building ventilation such as horse, cattle or poultry buildings

• 3 1⁄2" unrestricted throat with 36 sq. inches of free area per lineal foot

• 13 1⁄4" overall coverage, with wider flanges available

• Rises only 4 1⁄2"above the ridge, all metal edges are hemmed for strength and easier handling

• Use in conjunction with an equal area of vented soffit material or louvers for maximum air flow (36 sq in per lineal foot, 2.5 sq ft per vent)

• Individually packaged with flashing included, same flashing used for individual or continuous runs 

*Oversized Item: Shipping charges at checkout are an estimate only. You will be contacted with an accurate freight charge once your order has been received.