The HaloJrMax accurately detects feed flow with infrared light beams to control new or existing feed systems. This compact model features Max Run and Delay Start Timers with the electronics sealed in a plastic enclosure. Universal Power capable.
The Halo Feed System Control is designed to control a livestock feeding system.
Halo uses infrared technology to sense feed at the last drop of the system. This infrared sensor combined with included electronic controls completes the Halo system. Halo electronics contain all timing and alarm functions to efficiently control a livestock feeding system. Halo electronics feature a delay start timer, maximum run timer, and maximum run alarm outputs.
Halo can operate with or without an existing time clock. If an external time clock is used to control the system Halo will recognize the time clock and bypass the delay start time initially.
Halo infrared sensor design allows the sensor to detect a variety of feed densities and flow rates without adjustment. The sensor is impervious to changes in air temperature and humidity.
HaloJrMax Installation & Operation Instruction Manual
The Halo Feed Control is capable of operating a feed motor up to 1.5 HP at 240 volts without an external relay. Use of an external relay above these loads is required; use of an external relay at or below these loads is optional. Grounding is not required.
- Power Supply: 85-300 VAC
- Motor Contact: 20 Amp dry contact/1.5HP max
- Dimensions: 9.7"H x 7.3"W x 6.7"D
- Pre-Wired Alarm Contact: 1 Amp (120V) Dry Contact
- Inlet: 3.5" ID
- Outlet: 3.5" ID or 4" OD