Skip to main content.
We are currently working on making our websites more accessible. If you have any issues navigating our site, please feel free to contact us via phone at 910-594-0219 and ask for the web ordering department.
Close
Show your wishlist 0
You have no items in your shopping cart.
Search
Filters
The Tranz Former will transform common low flow valves into a high flow diaphragm valve while utilizing existing valve as the float, mount and actuator.
SKU: J-TFV
$50.53

The Jobe Tranz Former valve is designed to fit an existing common water tank float valve that is mounted to the sidewall of a tank or inside a cool cell trough. The Tranz Former transforms a common low flow valve into a high flow diaphragm valve by utilizing the existing valve as the float, mount and actuator. Tranz Former valves are a good choice where there is an existing valve that cannot meet higher flow requirements. 
Installation Steps: 

  1. Remove supply hose from existing float valve mount. 
  2. Attach Jobe Tranz Former valve to the float valve inlet.
  3. Remove Tranz Former quick connect hose fitting (eliminates hose twist) from the valve and attach supply line hose.
  4. Re-attach Tranz Former quick connect fitting to the valve and tighten to secure.


3/4" FGHT inlet
Max. Operating Temperature: 140° F (60° C)



Applications:

• Evaporative cool cell troughs
• Animal drinking troughs 

• Water storage tanks 
• Water Cisterns 
Features & Benefits:
• Unleashes full flow potential of your water supply
• Quick connect hose fitting eliminates hose twist
• Fits most over the top clamp on float valves
• Converts existing float valves in seconds
• Increases flow to trough during high consumption
• Easy to clean 
• Has internal filter
• Non corrosive material construction 

Materials
Valve Body Glass Filled Nylon
White Internal Parts Acetal
Diaphragm EPDM
Seal Urethane
O-Rings & GHT Seal Nitrile
Screws & Spring 304 Stainless Steel
Filter PP & Nylon


A B C D E
3-1/2" 2-15/16" 1-7/16" 11/16" 2-1/2"
Jobe™ Tranz Former™ Valve Diagram

The Jobe Tranz Former valve is designed to fit an existing common water tank float valve that is mounted to the sidewall of a tank or inside a cool cell trough. The Tranz Former transforms a common low flow valve into a high flow diaphragm valve by utilizing the existing valve as the float, mount and actuator. Tranz Former valves are a good choice where there is an existing valve that cannot meet higher flow requirements. 
Installation Steps: 

  1. Remove supply hose from existing float valve mount. 
  2. Attach Jobe Tranz Former valve to the float valve inlet.
  3. Remove Tranz Former quick connect hose fitting (eliminates hose twist) from the valve and attach supply line hose.
  4. Re-attach Tranz Former quick connect fitting to the valve and tighten to secure.


3/4" FGHT inlet
Max. Operating Temperature: 140° F (60° C)



Applications:

• Evaporative cool cell troughs
• Animal drinking troughs 

• Water storage tanks 
• Water Cisterns 
Features & Benefits:
• Unleashes full flow potential of your water supply
• Quick connect hose fitting eliminates hose twist
• Fits most over the top clamp on float valves
• Converts existing float valves in seconds
• Increases flow to trough during high consumption
• Easy to clean 
• Has internal filter
• Non corrosive material construction 

Materials
Valve Body Glass Filled Nylon
White Internal Parts Acetal
Diaphragm EPDM
Seal Urethane
O-Rings & GHT Seal Nitrile
Screws & Spring 304 Stainless Steel
Filter PP & Nylon


A B C D E
3-1/2" 2-15/16" 1-7/16" 11/16" 2-1/2"
Jobe™ Tranz Former™ Valve Diagram
Write your own review
  • Bad
  • Excellent
Customers who bought this item also bought

Grow-Disk™ Galvanized Tube Coupler

Connector for galvanized tube
$2.90

Hog Slat® Laser Fan Pulley Alignment Kit

Eliminate premature fan belt wear caused by poor pulley alignment.
$17.94

Cup Hook Driver

Two piece kit to enable operator to build a ceiling extension from 1/2" conduit (not furnished)
$27.00