The Classic Series Single Head Fixed Output Pump is a peristaltic metering pump that injects solutions at a fixed rate. It can be activated by a water meter for proportional feed for drinking water disinfection for animal health or homeowners or installed with a controller for sanitizing a swimming pool.
Great news for installers in the commercial pool industry, the Classic Series single head fixed pump has been tested by ETL to conform to the ANSI/NSF standard 50 when used with ANSI/NSF 50 listed controllers. Additional applications include pH control, oxidation, corrosion and scale control and more.
Item # |
Max Pressure |
Pump Tube # |
Gallons Per Day* |
Gallons Per Hour* |
Ounces Per Minute* |
45MFH1A1F |
100 psi (6.9 bar) |
#1 |
3.0 (11.4 L) |
0.13 (0.48 L) |
0.27 (7.92 mL) |
*Approximate output @ 60Hz
*Output rates depend on size of pump tube installed
Features & Benefits:
• 3-point roller design assists in anti-siphon protection
• Pump head requires no valves, allows for easy maintenance
• Self-priming against maximum working pressure, foot valve not required
• Pump does not lose prime or vapor lock
• Pumps off-gassing solutions and can run dry
• Output volume is not affected by back pressure
• Injection check valve included with models rated up to
100 psi (6.9 bar)
• Easy to change pump tube; lubrication is not required
• Pump tubes and pump heads interchange between models
• Models (Santoprene® only) tested by Water Quality Association to
conform to ANSI/NSF STD 61
• Fixed output models (Santoprene® only) tested by ETL to conform
to ANSI/NSF STD 50 only when used with ANSI/NSF STD 50
Stenner Classic Series Single Head Fixed Pump Specifications
Stenner Classic Series Pump Installation and Maintenance Manual