Shop Online

Toggle Switch Cover is UL listed for wet locations. Non-Corrosive. Non-Conductive

Replacement temperature sensor probe for Rotem ventilation controls.

5/16" Locknut Stainless Steel

The Smart IR Sensor uses “infrared” technology to detect the presence of all types of mash and pellet feeds. It is designed to be used in place of a proximity switch or drop tube switch and will operate with or without the aid of a power relay. 230V only.

Cumberland® 3" idler pulley assembly with zerk (Fenner Drive).

Drip nozzle for sow cooling systems. Flow rate of 1 GPH at 15 PSI. Package of 20 nozzles.

Crush-proof construction built for the pros, with a heavy-duty, all-zinc body that stands up to tough worksites and frequent use.

GrowerSELECT® single unloader weldment for M108 feed auger pipe.

LB White® Ignition Control Board for LB White Premier 40 and all Premier 2.0 model heaters

Featuring center flow technology, the water flows through the pin with an adjustable flow rate. Features stainless steel spring and dome screen and is intended for piglets.

50A 125/250V crow foot receptacle.

8" whisker switch latch out extension for chain disk system.

3/8" Locknut Stainless Steel

American Coolair® Fan Tensioner Bracket for 52" Fans

Replacement Tee Inlet Assy for Chemilizer™ (CH9000-209)

PVC end caps for cool cell systems. Priced/sold each.

Cumberland® 3" idler pulley.

Heavy-duty Female Quick Connectors provide an easy snap-on/snap-off connection to make professional jobs easier. Simply attach the female connector to the end of your hose. Then connect to a heavy duty male quick connector at the end of your watering tool for a tight seal that lasts, use after use.

GrowerSELECT 1/7 HP Gear Motor 225 RPM, 115V for Curtain Machines.

Clear protective cover with hardware for AP®/Cumberland® Smart IR feed line control switch.

LB White® Direct Spark Igniter & Sensor Assembly for LB White Premier 80 2.0 and Premier 170 2.0 model heaters

1/2" Locknut Stainless Steel

Heavy-duty Male Quick Connectors provide an easy snap-on/snap-off connection to make professional jobs easier. Simply attach the male connector to your sprinkler, nozzle or second hose. Then connect to a heavy duty female quick connector at the end of your hose for a tight seal that lasts, use after use.

Hired Hand® SENS-O-MATIC 2™ Hopper Switch for flexible auger feed systems.