Shop Online

Horizontal duplex weatherproof outlet cover. Comes with gasket and mounting screws. 110 v.

Replacement combustion cone kit for LB White® I-17 Infraconic® modulating brooder heater.

Lubing® 22mm square to 3/4" round transition fitting.

Heavy-duty, deluxe pistol grease gun with 18" flex hose.

Ties alarm system with LevALERT bin flag to notify you when feed levels are low.

The Moldex® Piggyback Adaptor for the 7000 & 9000 series masks allows users to combine the protection of any 7000 series cartridge filter and the P100 HEPA filter by using them in tandem. *ADAPTOR ONLY, NO FILTERS INCLUDED*

Replacement O-Ring for Prima Tech vaccination syringes. Available in small & large sizes.

Replacement bolt bushing for pit scraper corner wheel assemblies 452-708 & HS1152.

Tee fittings with access cover. Conduit PVC construction.

Tee fitting, galvanized. 3/4" x 3/4" x 1/2"

Windstorm™ 3" idler pulley includes a SB002 bushing with a 3/8" inner diameter and 1/2" shoulder.

Banjo Y-shaped strainer filter. 2" diameter 30 mesh sized strainer.

Heavy-weight string knit cotton/polyester white gloves. Pack of 12.

If the end of your hose is crushed, corroded or worn, you can replace it with a new coupling. Simply cut off the old coupling and attach the new one. For 5/8″ hoses.

GrowerSELECT® high limit switch, 350°F temperature limit with manual reset.

Even when rodents have an available food source, they still drink water, so Tomcat Liquid Concentrate is an excellent way to supplement a rodent control program especially in hot, dry conditions.

Windstorm™/AirStorm™ tensioner assembly comes with splash guard for belt drive fans. (excludes Windstorm™ 36" fans)

Unloader weldment With Stub Shaft And Bearing for 6" Rigid Auger. To only be used for systems with 6 inch auger shafts that have a 1 inch inside diameter.

Don’t let a crushed coupling take your hose out of commission. Replace damaged male hose ends with a heavy-duty brass and zinc coupling that offers superior durability for active job sites.

GrowerSELECT® high limit switch, 320°F, manual reset. Fits Hired Hand® 225K models.

Replacement 3 wire limit switch assembly for Hired Hand® PowerTrak® curtain machine.

Lubing® transition adapter fitting connects 22mm square drinker line to 22mm (~7/8") regulator outlet.

Lubing® transition adapter fitting . 28mm square female end and 22mm round male end with o-ring.

Thumb screw is used to tighten the counter weight to bracket on FH1 inlet.