Shop Online

Replacement bolt bushing for pit scraper corner wheel assemblies 452-708 & HS1152.

Tee fittings with access cover. Conduit PVC construction.

Tee fitting, galvanized. 3/4" x 3/4" x 1/2"

Windstorm™ 3" idler pulley includes a SB002 bushing with a 3/8" inner diameter and 1/2" shoulder.

Banjo Y-shaped strainer filter. 2" diameter 30 mesh sized strainer.

Heavy-weight string knit cotton/polyester white gloves. Pack of 12.

If the end of your hose is crushed, corroded or worn, you can replace it with a new coupling. Simply cut off the old coupling and attach the new one. For 5/8″ hoses.

GrowerSELECT® high limit switch, 350°F temperature limit with manual reset.

Even when rodents have an available food source, they still drink water, so Tomcat Liquid Concentrate is an excellent way to supplement a rodent control program especially in hot, dry conditions.

Windstorm™/AirStorm™ tensioner assembly comes with splash guard for belt drive fans. (excludes Windstorm™ 36" fans)

Unloader weldment With Stub Shaft And Bearing for 6" Rigid Auger. To only be used for systems with 6 inch auger shafts that have a 1 inch inside diameter.

Don’t let a crushed coupling take your hose out of commission. Replace damaged male hose ends with a heavy-duty brass and zinc coupling that offers superior durability for active job sites.

GrowerSELECT® high limit switch, 320°F, manual reset. Fits Hired Hand® 225K models.

Replacement 3 wire limit switch assembly for Hired Hand® PowerTrak® curtain machine.

Lubing® transition adapter fitting connects 22mm square drinker line to 22mm (~7/8") regulator outlet.

Lubing® transition adapter fitting . 28mm square female end and 22mm round male end with o-ring.

Thumb screw is used to tighten the counter weight to bracket on FH1 inlet.

Replacement motor pulley for Windstorm™ fan, high capacity model, 4.5" diameter.

Windstorm™ tensioner assembly for Windstorm™ 36" fans.

20 mesh screen for 1-1/2" in-line cool cell filter.

360 Degree 25 GPH

Don’t let a crushed coupling take your hose out of commission. Replace damaged female hose ends with a heavy-duty brass and zinc coupling that offers superior durability for active job sites.

Two independent slides allow separate control of two augers passing through unloader.

Tension spring to allow automatic adjustments of ventilation inlets and return feed drop cables.