Shop Online

AP® fiberglass composite fan prop replacement for GAPP-24 fans.

Replacement relay for AP Chain Disk Controls GAPCD-500&600

Unloader weldment With Stub Shaft And Bearing for 4" Rigid Auger.

Polystyrene replacement insert for B1200 Raydot.

Pan Standard Cone-Classic Flood Feeder

5 pound bucket of loose pellets that produce effective knockdown during clean-out.

For instant reassurance that your fence is working. To setup, clip onto the fence wire and push the lead into the ground. If the voltage drops below 3000V, the Live Fence Indicator starts to flash intermittently and if the voltage drops below 2000V, the Live Fence Indicator will stop flashing altogether.

Gasolec® gas jets for poultry brooder heaters.

If the end of your hose is crushed, corroded or worn, you can replace it with a new coupling. Simply cut off the old coupling and attach the new one. For 5/8″ hoses.

Axle for plastic idler guide return wheel in Grow-Disk™ drive unit.

Single transfer plate assembly with slide gate. Use with all GrowerSELECT® models. Includes hardware kit.

Replacement Lovejoy coupling for Hired Hand® PowerTrak® curtain machine (H6602-0236).

Horizontal duplex weatherproof outlet cover. Comes with gasket and mounting screws. 110 v.

Replacement combustion cone kit for LB White® I-17 Infraconic® modulating brooder heater.

Lubing® 22mm square to 3/4" round transition fitting.

Heavy-duty, deluxe pistol grease gun with 18" flex hose.

Ties alarm system with LevALERT bin flag to notify you when feed levels are low.

The Moldex® Piggyback Adaptor for the 7000 & 9000 series masks allows users to combine the protection of any 7000 series cartridge filter and the P100 HEPA filter by using them in tandem. *ADAPTOR ONLY, NO FILTERS INCLUDED*

Replacement O-Ring for Prima Tech vaccination syringes. Available in small & large sizes.

Replacement bolt bushing for pit scraper corner wheel assemblies 452-708 & HS1152.

Tee fittings with access cover. Conduit PVC construction.

Tee fitting, galvanized. 3/4" x 3/4" x 1/2"

Windstorm™ 3" idler pulley includes a SB002 bushing with a 3/8" inner diameter and 1/2" shoulder.

Banjo Y-shaped strainer filter. 2" diameter 30 mesh sized strainer.