Shop Online

Heavy-weight string knit cotton/polyester white gloves. Pack of 12.

If the end of your hose is crushed, corroded or worn, you can replace it with a new coupling. Simply cut off the old coupling and attach the new one. For 5/8″ hoses.

GrowerSELECT® high limit switch, 350°F temperature limit with manual reset.

Even when rodents have an available food source, they still drink water, so Tomcat Liquid Concentrate is an excellent way to supplement a rodent control program especially in hot, dry conditions.

Windstorm™/AirStorm™ tensioner assembly comes with splash guard for belt drive fans. (excludes Windstorm™ 36" fans)

Unloader weldment With Stub Shaft And Bearing for 6" Rigid Auger. To only be used for systems with 6 inch auger shafts that have a 1 inch inside diameter.

Don’t let a crushed coupling take your hose out of commission. Replace damaged male hose ends with a heavy-duty brass and zinc coupling that offers superior durability for active job sites.

GrowerSELECT® high limit switch, 320°F, manual reset. Fits Hired Hand® 225K models.

Replacement 3 wire limit switch assembly for Hired Hand® PowerTrak® curtain machine.

Lubing® transition adapter fitting connects 22mm square drinker line to 22mm (~7/8") regulator outlet.

Lubing® transition adapter fitting . 28mm square female end and 22mm round male end with o-ring.

Thumb screw is used to tighten the counter weight to bracket on FH1 inlet.

SWASHEQUIPMENT™ will provide shine and gloss to equipment as well as protection from farm soils and grime. Surface Applications: Tractors, trucks, cars, mowers, combines, composters, windrowers, tillers, etc.

Replacement motor pulley for Windstorm™ fan, high capacity model, 4.5" diameter.

Windstorm™ tensioner assembly for Windstorm™ 36" fans.

20 mesh screen for 1-1/2" in-line cool cell filter.

360 Degree 25 GPH

Don’t let a crushed coupling take your hose out of commission. Replace damaged female hose ends with a heavy-duty brass and zinc coupling that offers superior durability for active job sites.

Two independent slides allow separate control of two augers passing through unloader.

Tension spring to allow automatic adjustments of ventilation inlets and return feed drop cables.

Once treated with SWASHHOUSE™, it will become difficult for unwanted matter to build-up on surfaces. Any soils that may build up are actually held away from the surfaces by the water soluble film “shield.”

Heavy use can take a toll on professional equipment. Give your hose new life fast with Gilmour’s durable brass and zinc hose mender. Simply cut out the crack or hole in your hose, attach a mender to either side and tighten them together for a tight, leak-resistant connection.

Replacement caster wheel for Highcroft cart model 9. Tire is 4.10/3.50-4 with 10-1/2" O.D. and a width of 4-1/2". Plate dimensions are 4" x 4-1/2" with 1/2" holes. Priced each.

Hired Hand® low pressure gas switch for models 75M & 225M heaters.