Shop Online

10-24 x 3/8" Pan Head Screw for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #8 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #5 in diagram 2).

(Part #5) Aerotech® Limit Switch Spring Retainer

Felco® C7 red handle cable cutter handles up to 5/32" cable for a clean finish on galvanized and stainless steel.

(Part #4) Hired Hand® Upper Flange Bracket for Hired Hand® PowerTrak machine.

(Part #9) 10-32 x 1/4" Pan Head Screw for GRO40-L2, GRO40-L3, & GRO40-L9 brooders.

5/16" x 1/2" Bolt zinc

American Coolair® Fan Blade Assembly for 36" Fans

Replacement Actuator Gasket for Dosatron DM11F

Easily cut 1/4" steel cable. Lightweight cable cutters allow simple overhead use.

Goulds® 1/3 HP submersible cool cell pump, 115V.

Replacement shutter kit for National Incinerator HD 500, LP and NG models. Also works with LP Gas incinerators (part #5 in the diagram).

Igniter transformer coil for Burn Easy incinerator. Will also work for Wayne® Diesel Burners (part #5 in the diagram).

(Part #5) Load Block Assembly With Cotter Pins Curtain Machine

(Part #6) R.H. Winch Panel for Proterra® AGLA47859 & AGLA48028 Curtain Winch Series.

U Bolt 5/16-18 X 2.5 Id Zinc

Vantek® V-Gard combines the hardness and chemical resistance properties of 440LV Epoxy with the added wear resistance of Vantek Admix and Broadcast aggregate blends.

3/4" Fogger Tee w/ 0.2 GPM Tip

5/16" x 3/4" Bolt zinc

Herculite long life agricultural curtain for hog and poultry houses.

Replacement Actuator O-Ring for Dosatron DM11F ( 2 req)

Replacement cutting blade for Felco C9 cable cutters. Two blades must be purchased to replace the cutting head on C9 handles.

(Part #10) M8 Flat Washer for GRO40-L2, GRO40-L3, & GRO40-L9 brooders.

LP pilot jet for Gasolec® G12 brooder heater.

U-Bolt 5/16" X 2-1/2" X 3-9/16" LEGS ZINC