Canada
中国
Polska
România
Україна
Méjico
Shop Online
Thermocouple Holder Gasolec® G12 Brooder
SKU: GAS806830
Thermocouple holder for Gasolec® G12 brooder heater.
$3.76
Vantek® Broadcast 50Lb Bag
SKU: VTK3010
Vantek® Broadcast (50 lb. bag) is applied to the wet epoxy until the surface looks dry.
$16.34
Wayne® Diesel Burner Fan & Burner Housing
SKU: RK1204
(Part #4) Wayne® Diesel Burner Fan & Burner Housing for Burn Easy® Incinerators.
$96.09
Winch Thrust Bracket
SKU: C47763
(Part #5) Winch Thrust Bracket for Proterra® AGLA47859 & AGLA48028 Curtain Winch Series.
$26.93
10-24 x 3/8" Pan Head Screw
SKU: 6E10031
10-24 x 3/8" Pan Head Screw for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #8 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #5 in diagram 2).
$0.12
Aerotech® Limit Switch Spring Retainer
SKU: AC1937
(Part #5) Aerotech® Limit Switch Spring Retainer
$3.01
Felco® C7 Cable Cutter
SKU: 59882
Felco® C7 red handle cable cutter handles up to 5/32" cable for a clean finish on galvanized and stainless steel.
$75.06
Franklin Electric® Pump Booster 1 HP 10GPM 115v/230v Stainless Steel
SKU: 95831020
Give your next light commercial or irrigation job a boost with a complete and versatile solution. Franklin Electric’s BT4 Series offer a wide array of multi-stage horizontal pumps engineered to meet your pressure boosting needs, delivering nominal flow ratings from 5–90 gpm in ranges up to 7.5 horsepower.
$662.50
Hired Hand® Upper Flange Bracket
SKU: H0404-0101
(Part #4) Hired Hand® Upper Flange Bracket for Hired Hand® PowerTrak machine.
$9.56
10-32 x 1/4" Pan Head Screw
SKU: GRO1036
(Part #9) 10-32 x 1/4" Pan Head Screw for GRO40-L2, GRO40-L3, & GRO40-L9 brooders.
$0.31
American Coolair® 36" Fan Blade Assembly
SKU: CA14-235-62-1
American Coolair® Fan Blade Assembly for 36" Fans
$327.68
Felco® C9 Heavy Duty Cable Cutter
SKU: 598821
Easily cut 1/4" steel cable. Lightweight cable cutters allow simple overhead use.
$249.41
Goulds® 1/3 HP Submersible Pump - Manual 115V
SKU: LSP0311
Goulds® 1/3 HP submersible cool cell pump, 115V.
$253.34
HD 500 Shutter Replacement Kit
SKU: NI6401-90
Replacement shutter kit for National Incinerator HD 500, LP and NG models. Also works with LP Gas incinerators (part #5 in the diagram).
$120.42
Igniter Transformer
SKU: RK1217
Igniter transformer coil for Burn Easy incinerator. Will also work for Wayne® Diesel Burners (part #5 in the diagram).
$148.55
Load Block Assembly With Cotter Pins Curtain Machine
SKU: HS583-8
(Part #5) Load Block Assembly With Cotter Pins Curtain Machine
$59.40
R.H. Winch Panel
SKU: AGL47771-2
(Part #6) R.H. Winch Panel for Proterra® AGLA47859 & AGLA48028 Curtain Winch Series.
$3.04
Vantek® V-Gard® Slurry Kit
SKU: VTK3003
Vantek® V-Gard combines the hardness and chemical resistance properties of 440LV Epoxy with the added wear resistance of Vantek Admix and Broadcast aggregate blends.
$200.98
