Shop Online

Clear PVC feed line tube for Grow-Disk Chain Disk feed systems. 2.36" OD x 10' long.

Replacement motor for National Incinerator HD 500. Works with the LP Gas incinerators as well (part #12 in the diagram).

Rugged 1/2 HP submersible pump with cast iron housing built for continuous operation in cool cell tanks. Automatic operation.

Vantek® V-Gard CSS System is a blend of 440LV Epoxy and Fumed Silica thickener that is designed for thinner overlays or wall coatings that can be easily roll coat applied.

(Part #11) Wayne® Diesel Burner Oil Line Assembly for Burn Easy® Incinerators.

(Part #26) #31 Main Burner Orifice - NG for GRO40-L2, GRO40-L3, & GRO40-L9 brooders.

3/8" x 2-1/2" Bolt zinc

Replacement Nuts for Lid forDosatron DM11F (11 required)

(Part #10) Hired Hand® Shaft Rod Assembly for Hired Hand® PowerTrak machine.

#50 Main Burner Orifice - LP/Butane for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #27 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #23 in diagram 2).

(Part #14) 1/8" x 3/4" Cotter Pin for Proterra® AGLA47859 & AGLA48028 Curtain Winch Series.

3/8" x 3" Bolt zinc

Standard 4.2 oz

American Coolair® Fan Blade for 48" NBF & NCFB Fans

Replacement Nut for Transfer Body for Dosatron DM11F ( 6 req)

1/2" MPT x 1/8" FPT PVC. SCH 40

Ignitor electrode for National Incincerator LP model. Works with LP Gas incinerators as well (part #13 in the diagram).

Replacement lock collar for Plasson® Broiler drinker mechanism.

Safety device for Gasolec® G12 brooder heaters.

Suntec Fuel pump for Burn-Easy® Incinerator. Will also work with Wayne® Diesel Burners (part #12 in the diagram).

This spiral design assures proper blending of resins and aggregates to achieve the right mix and cure.

10" Dia x 1" Bore Fan Pulley AK104-1

3/8" x 3-1/2" Bolt zinc

Premium 6 oz.