Shop Online

World’s first multi-post pinlock offset insulator. This multi-post insulator is able to be attached to both sides of a T-Post or nailed to a wooden post. It has a pinlock clip that allows for easy fence construction. Sold in packs of 20.

20' long with O.D. of 2.375 inches

Rugged 1/3 HP pump with cast iron housing built for continuous operation in cool cell tanks. Manual operation.

Replacement spider gear spacer for hub coupler

(Part #11) LP Gas Barrier Ground Kit that works with National Incinerator® models.

Replacement 18 inch (450MM) flexible sight tube for Lubing® poultry water drinker lines.

Replacement 24 inch flexible sight tube for Lubing® poultry water drinker lines.

Plate Bearing Base for ACME® Fans

(Part # 5) Shutter PVC 57.25" X 59.25" Trimmed Edge

Vantek® Prep & Etch quickly profiles the substrate and removes elements that can interfere with bonding.

1/8" nylon fogger nozzles, available in 1 GPH and 2 GPH options.

3/8" x 1-1/2 Bolt zinc

Replacement Isolation Body for Dosatron DM11F

White 10' long straight PVC tubing for Grow-Disk and chain disk systems using model 236/60 pipe.

GrowerSELECT® 2" turkey feed line pipe. 18 gauge G90 galvanized roll formed steel.

Pilot flame cover for Gasolec® G12 brooder heater.

Replacement mechanism top for Plasson® Broiler drinker.

V-Clamp (manifold support) for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #24 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #20 in diagram 2).

1.9mm Main Burner Orifice - LP for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #25 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 (part #21 in the diagram 2).

3/8" x 2" Bolt zinc

6'0" 4.1 oz., Single Hem Curtain

(Part #18) Aerotech® 30 RPM Gearmotor w/ Brake

American Coolair® Fan Blade for 42" NBF Fans

Replacement Lower Stem Nut for Dosatron DM11F