Shop Online

(Part #12) Wayne® Diesel Burner Danfoss Fuel Pump for Burn Easy® Incinerators.

1/2" x 1" Bolt zinc

3/8" USA Style Compression Sleeve for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #30 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #27 in diagram 2).

1" MPT x 3/4" FPT brass bushing used with Goulds booster pumps

Replacement Plunger for Dosatron DM11F

(Part #12) Hired Hand® Load-Bearing Bracket for Hired Hand® PowerTrak machine.

Replacement stainless steel spring for Plasson® broiler drinker.

1/2" x 1-1/4" Bolt zinc

3/8" USA Style Compression Nut for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #31 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #28 in diagram 2).

American Coolair® Fan Strut for 54" NBF Fans

Replacement Diaphragm Seal for Dosatron DM11F

Gas valve for LP or NG National Incinerator models. Works with LP Gas incinerators as well (part #15 in the diagram).

Gun assembly for Burn-Easy Incinerators. Will also work with Wayne® Diesel Burners (part #16 in the diagram).

(Part #16) Industrial Bearing Thrust for Proterra® AGLA47859 & AGLA48028 Curtain Winch Series.

Vantek® N1 Solvent is a must for keeping tools and equipment free from curing resin build up.

1/2" x 1-1/2" Bolt zinc

3/8" Main Burner Tubing for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #32 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #29 in diagram 2).

Replacement Plunger Bottom Seal for Dosatron DM11F

1/2" x 2" Bolt zinc

(Part #33) 1/4" Pilot Burner Tubing for GRO40-L2 brooders.

1/8" nylon hex head plug with MPT.

Herculite sets the standard in quality and high performance livestock curtains.

Herculite sets the standard in quality and high performance livestock curtains.

(Part #7) Replacement 1" thrust bearing assembly with support block for Airstream® Curtain Controller machine (GCC3630).