Close
0
You have no items in your shopping cart.
Search
Filters
RSS

Blog posts tagged with 'heating'

Big Foot Tube Brooders

Another item of interest at the 2012 IPE show was the Big Foot Radiant Tube Heater by Space Ray. Space Ray manufacturers some the best heating equipment on the market; Hog Slat and Georgia Poultry have carried their 40,000 Btu poultry brooder and tube heaters for years.

“The Big Foot is a hybrid heater that combines the best qualities of the standard brooder and tube heaters,” explained Space Ray’s Wilf Jackson. “Tube heaters have the advantage of less equipment to maintain but tend to produce a heating pattern that is oval in shape, while individual brooders produce a better heating footprint on the floor but require a producer to clean more pieces of equipment.”

“The heating footprint of the Big Foot is rectangular without gaps and the equipment can be installed close to the ceiling like a tube heater. Big Foot achieves its large, even footprint by utilizing a 19° angle on the reflector shield eliminating problems with convective wash as the heat waves are directed towards the house floor.”

Current plans are to offer the Big Foot in 60,000 and 90,000 Btu models and both single and dual stage ignition with emitter lengths of 15’ and 20’.

The Big Foot is being field tested by Hog Slat in a local farm and Space Ray is having independent tests conducted starting in February. We look forward to reporting on the results of those tests in future blogs.

Comments (0)
Pen Vise is the Right Tool for Cleaning Brooder Orifices

Having the right tool makes any maintenance chore easier and Hog Slat’s Pen Vise is the perfect tool for cleaning clogged brooder and heater orifices.

Pen Vise

Instead of  looking for a piece of wire or a drill bit close to the right size, the Pen Vise keeps tapered cleaning needles at your fingertips.  This tool features a screw-tightened jaw on one end with a 12-needle storage compartment on the opposite. An additional benefit;  you’re not as likely to lose the five-inch long Pen Vise if you happen to drop it into the liter.

Dan Yates, the hands and voice in the video, has used the same Pen Vise for over five years.  He offered these suggestions,

“The needles taper down to a smaller size than we need for our applications.  If you clip about 1/2″ off the end with a side cutter, you won’t bend the end like I did in the video.”
 
“A needle is just a better tool than a drill bit for cleaning heater orifices. Repeated use of a drill bit can enlarge the hole causing a weak, yellow flame with poor combustion.”

Click here to order your  Pen Vise today.

 

Comments (0)